Loading... Please wait...

Products

Monster Mill MM2 - Pro w/Base and Hopper

  • Image 1
  • Image 2
  • Comes with base and hopper
Price:
$264.00

Sorry but this item is currently unavailable.

Please check back at a later stage.


Introducing the largest in our line of 2-roller Monster Mills, the MM2-Pro. This is an awsome upgrade to our already successful MM-2 mill, meant to compete and win against the best milling products available. The Pro model upgrades the rollers to 2" diameter, adds the billet aluminum knobs, as well as the 1/2" drive shaft as standard. It consists of a 6061 aluminum block frame with two 6" long, and 2" diameter steel rollers riding on SAE 841 oil impregnated bronze bushings. We use a superior grade of steel (1144 alloy) that is much harder than what is found on most comparable products and should last almost twice as long. The drive shaft, and all the axles are integral to the roller rather than screwed into the ends. This makes it fine to drive the mill clockwise, or counter-clockwise. All the axles are 3/8", with minimal freeplay in the bushings, and the larger 1/2" shaft comes standard. The larger 2" diameter rollers allow a finer crush with more minimal husk damage, and milling at smaller gap settings without worry of skipping. This mill also comes with a much larger gap adjustment range of .160", more than double our standard range that should allow you to mill other grains like corn, as well as the conventional grist bills with barley.

One of the knurled steel rollers is driven by a standard 1/2" electric drill (not included) to feed the grain through the adjustable gap and crush the grist. Make sure you have a very robust 1/2" drive corded drill to drive this mill, we can't be responsible for drill death! : ) Don't even ask about a hand crank for this mill! Both ends of the non-driven roller ride in bushings that are offset mounted in an adjustable knob. The billet knob is held in a fixed position by a black oxide bolt you can loosen to adjust the mill. This system provides an adjustment range of .160". Our new design knobs are milled from solid 6061 aluminum barstock for excellent durability. The flange has two semi-circular slots that allow you to attach the knob positively to the face of the aluminum frame. They have 12 sides for a positive grip. You need to fabricate a base and hopper to feed the grist through the mill. The mill can be mounted above or below the base and attached using the included mounting bolts.

Comes with a base and hopper

 

 

 

 

You Recently Viewed...